AEG Refrigerator Owner's Manual

Installation

Choosing the Right Location

When installing your AEG refrigerator, selecting the optimal location is crucial for efficient operation and longevity. Consider these key factors when deciding on a spot:

1. Proximity to Power Source: Ensure the location is near a grounded electrical outlet to avoid using extension cords.

2. Temperature Stability: Avoid areas exposed to direct sunlight, heat sources like ovens, or cold areas such as unheated garages during winter.

3. Space Requirements: Make sure there is enough space around the refrigerator for ventilation. Check the manual for specific clearance requirements.

4. Floor Solidity: The surface should be solid and level to support the weight of the refrigerator and minimize vibration and noise.

5. Convenience: Place the refrigerator in a location that allows easy access to doors and drawers without obstruction.

Unpacking Your Refrigerator

Upon delivery, carefully unpack your refrigerator to ensure all components are intact and undamaged. Follow these steps:

1. Inspect the Exterior: Look for any dents, scratches, or damage to the exterior surfaces. Report issues to the retailer immediately.

2. Check Accessories: Verify that all included accessories, such as shelves, trays, and instructional materials, are present.

3. Remove Packaging Materials: Carefully remove all protective films, tapes, and packaging materials from the refrigerator, door gasket, and interior components.

4. Dispose Responsibly: Follow local guidelines for recycling or disposing of packaging materials.

Leveling the Refrigerator

Proper leveling is essential for efficient operation and to prevent issues such as door misalignment and ice maker malfunction. Follow these instructions:

1. Position the Refrigerator: Move the refrigerator into its designated spot, ensuring it’s close to a power outlet.

2. Adjust the Legs: Use an adjustable wrench to adjust the leveling legs. Turn the legs clockwise to raise the unit and counterclockwise to lower it.

3. Ensure Evenness: Use a spirit level to check that the refrigerator is perfectly level from side to side and front to back.

4. Secure Position: Once level, ensure all four corners of the refrigerator are firmly in contact with the floor.

Electrical Requirements

To ensure safe and efficient operation, adhere to these electrical guidelines:

1. Voltage Compatibility: Verify that the refrigerator is compatible with your home’s electrical system, typically requiring a 110/120V outlet.

2. Dedicated Outlet: Use a dedicated outlet for the refrigerator to prevent overload and ensure consistent power supply.

3. Avoid Extension Cords: Never use extension cords or multi-plug adaptors due to the risk of overheating and fire hazards.

4. Surge Protection: Consider using a surge protector to protect the appliance from voltage spikes.

Water Supply Connection

For models equipped with ice makers or water dispensers, connecting the water supply is crucial. Use the following guidelines:

1. Locate a Nearby Water Source: Ideally, the water supply line should be within 6 feet of the refrigerator.

2. Use Proper Tubing: Opt for approved copper or stainless-steel tubing, avoiding plastic-based alternatives.

3. Turn Off Water Supply: Before starting, ensure the water supply is completely shut off.

4. Install a Shut-off Valve: Consider installing an easily accessible shut-off valve on the water line for future maintenance.

5. Connect the Tubing: Follow the user manual to connect the tubing securely and check for leaks by slowly turning on the water supply.

Initial Setup and First Use

After installation, your refrigerator needs initial configuration for optimal performance:

1. Clean the Interior: Wipe down the interior surfaces with a damp cloth and mild detergent, then dry thoroughly before use.

2. Set Temperature Controls: Adjust the temperature settings as per the manual’s recommendations. Allow the refrigerator to stabilize before stocking.

3. Wait Before Loading: It’s advisable to wait at least 2-3 hours before placing any food items inside to ensure optimal cooling.

4. Check Functions: Test all functions, such as lighting, control panel responsiveness, and water dispensers, to ensure everything is operational.

By following these guidelines, your AEG refrigerator will be properly installed, ensuring years of efficient and trouble-free service.