Beko Refrigerator Owner's Manual

Installation

Unboxing and Inspecting Your Refrigerator

Before you start the installation process, it is essential to carefully unbox your Beko refrigerator and inspect it for any potential damage that might have occurred during shipping. Follow these steps to ensure a thorough inspection:

1. Carefully Remove Packaging: Begin by cutting open the box around the top edges. Lift the box upwards to remove it rather than pulling the refrigerator out. Be cautious of the protective foam layers as you remove them.

2. Inspect the Exterior: Look for any scratches, dents, or other visible damage on the refrigerator's surface. Make sure the doors open and close smoothly and evenly. Check the base to ensure that the refrigerator stands level on the floor.

3. Check the Interior Components: Open the doors and verify that all components, such as shelves, drawers, and the user manual, are present and undamaged. Make sure there are no loose items in the refrigerator compartments.

4. Document Any Issues: If you notice any issues during your inspection, take photographs and contact Beko customer support or your retailer to report the problem immediately.

Choosing the Appropriate Location

Selecting the right spot for your refrigerator is crucial for optimal performance and energy efficiency. Consider the following factors when choosing a location:

• Adequate Space: Ensure there is enough room to open the refrigerator doors fully and access all compartments. Leave at least two inches of space on either side and at the top for ventilation.

• Away from Heat Sources: Do not place the refrigerator near heat-emitting appliances like ovens or radiators. Direct exposure to sunlight should also be avoided.

• Stable and Level Surface: Choose a flat area on your floor to prevent the refrigerator from rocking or tilting. A slight tilt backward helps the doors close effortlessly.

• Proximity to Water Supply: If your model includes an ice maker, place the refrigerator close to a water source to easily connect the water line.

Tools and Parts Required for Installation

Before beginning the installation, gather the necessary tools and components to streamline the process:

• Phillips Screwdriver: Essential for securing various components.
• Adjustable Wrench: Needed for connecting the water supply line for ice maker models.
• Level: To ensure the refrigerator is properly leveled.
• Measuring Tape: Helpful for ensuring appropriate spacing.
• Teflon Tape: Useful in ensuring leak-free water supply connections.

Step-by-Step Installation Guide

Leveling the Refrigerator

1. Position the Refrigerator: Place the unit in its designated location, aligning it to any adjacent counter space or cabinetry.

2. Use the Level: Place the level on top of the refrigerator. Adjust the adjustable feet by twisting them until the unit is level both front-to-back and side-to-side.

Connecting the Water Supply for Models with Ice Makers

1. Locate the Water Inlet Valve: Situated at the back of the refrigerator.

2. Attach the Water Line: Connect the water line to the water inlet valve using the adjustable wrench. Use Teflon tape to secure and leak-proof the connection.

3. Turn on the Water Supply: Ensure the connection is secure and check for any leaks.

Setting Up the Shelving and Storage

1. Install Shelves and Drawers: Position adjustable shelves at your preferred heights. Place drawers in their designated tracks.

2. Arrange Door Bins: Customize the height of door bins for easy access to frequently used items.

Powering Up and Initial Settings

After the refrigerator is installed and set up, follow these steps to power up and configure initial settings:

1. Plug In the Refrigerator: Connect the power cord to an electrical outlet. The refrigerator should turn on automatically.

2. Set Your Preferred Temperature: Use the control panel to set the temperatures of the fridge and freezer compartments according to your preference.

3. Check the Operation: Listen for the sound of the compressor and ensure the internal lights turn on when you open the doors.

Safety Precautions During Installation

Ensuring safety during the installation process is vital. Remember these precautions:

• Avoid Overloading Outlets: Ensure the power outlet can handle the refrigerator's electrical load. Avoid using extension cords or power strips.

• Handle with Care: Move the refrigerator with assistance to prevent injury or damage to the unit.

• Keep Area Clear: Ensure that the installation area is free from clutter to prevent accidents.

By following these guidelines, you will successfully install your Beko refrigerator, ensuring years of efficient operation.