Defy Appliances Refrigerator Owner's Manual

Installation

Selecting the Right Location

Choosing the appropriate location for your Defy refrigerator is crucial for optimal performance and efficiency. Ensure that the location:

• Is well-ventilated: Allow at least 50mm of space on all sides to promote airflow and prevent overheating.
• Has a stable and level floor: A flat surface is necessary to ensure the appliance is balanced.
• Avoids direct sunlight: Exposure to the sun can influence the refrigerator’s temperature control.
• Is not close to heat sources: Keep your refrigerator away from stoves, ovens, and radiators.
• Allows easy access to the power outlet: Ensure that the power cord can reach the outlet without being strained or pinched.

Unpacking and Removing Packaging Materials

Once you've chosen the right location, it's time to unpack your refrigerator. Follow these steps:

1. Carefully remove the refrigerator from its box. Avoid using sharp objects to cut open the packaging to prevent damage to the appliance.
2. Remove all packing materials. This includes foam inserts, protective films, and any tapes securing components.
3. Inspect your appliance. Check for any visible signs of damage. If any issues are found, contact your retailer before proceeding.

Leveling the Refrigerator

Proper leveling of your refrigerator is essential for preventing unusual noises and ensuring efficient operation. To level your appliance:

1. Adjust the front legs: Use a wrench to turn the adjustable leveling legs. Rotate clockwise to raise the leg and counter-clockwise to lower it.
2. Use a spirit level: Place it on the top edge of the refrigerator to ensure it is perfectly horizontal.
3. Verify stability: Open the door halfway. If it closes or swings open, further adjustments are necessary.

Electrical Requirements and Power Outlet Specification

Your Defy refrigerator requires a dedicated electrical outlet to function properly:

• Voltage requirement: Ensure a standard outlet with an 220-240V, 50Hz supply is available.
• Circuit breaker: A dedicated circuit breaker rated for 10–15 amperes is recommended.
• Avoid extension cords: Use of extension cords or adapters can lead to voltage drops or overheating, which may damage the appliance.

Water Supply Connection for Water Dispenser Models

For models with a water dispenser, connection to a water supply is necessary:

1. Locate the water supply inlet: Usually situated at the back of the refrigerator.
2. Attach a water line: Connect a standard 1/4-inch flexible water line to the inlet.
3. Secure the connection: Ensure all connections are tight to prevent leaks.
4. Turn on the water supply: Check for leaks and correct as necessary.

Initial Startup and Temperature Settings

Once everything is connected, you can proceed with the initial startup and setting of temperatures:

1. Plug in the refrigerator: Verify that the power light is on.
2. Set the desired temperatures:
   • Refrigerator compartment: Recommended initial setting is 4°C.
   • Freezer compartment: Recommended initial setting is -18°C.
3. Allow the appliance to stabilize: Let it run for a minimum of 2–4 hours before adding any food.

Safety Precautions during Installation

Prioritizing safety will ensure both user protection and appliance longevity:

• Do not plug in a damaged power cord: Inspect the cord for any wear or damage before use.
• Avoid using the appliance in wet or damp conditions: This could increase the risk of electric shock.
• Follow all manufacturer instructions: Adhering to the manual minimizes risks and enhances efficient operation.
• Have two people for moving heavier units: This reduces the risk of injury and damage to the appliance.

By following these guidelines, you set the stage for optimal operation and longevity of your Defy refrigerator, ensuring that it effectively meets your household needs.