HomeFaqsRefrigerator-MaintenanceHow-To-Reset-Filter-Light-On-Samsung-Refrigerator

How to Reset Filter Light on Samsung Refrigerator

Resetting the filter light on your Samsung refrigerator is a straightforward process. This guide will help you understand why it's necessary, how to do it, and offer troubleshooting tips if you encounter any issues.

Why Reset the Filter Light?

The filter light on your Samsung refrigerator is an indicator that helps you maintain the quality of your water and ice by reminding you to replace the water filter. Once the filter is replaced, resetting the light ensures the reminder system functions correctly for future filter changes.

Default Filter Change Interval

Refrigerator Model Filter Duration (Months) Approx. Water Volume
French Door Models 6 300 gallons
Side-by-Side Models 6 300 gallons
Four-Door Models 6 300 gallons

Steps to Reset the Filter Light

Identify Your Samsung Refrigerator Model

Different models have variations in button configurations and labels. The reset procedure is similar but may have slight differences in the button you need to press.

Reset Procedure

  1. Locate the Filter Indicator Light
    The filter light is usually located on the display panel. It's typically a small, red or orange LED that illuminates when the filter needs changing.

  2. Replace the Water Filter

    • Open the filter housing and remove the old filter.
    • Insert a new Samsung-approved filter into the housing.
    • Ensure it is properly seated to avoid leaks.

  3. Reset the Indicator Light
    Depending on your model, follow these steps:

    French Door Model

    • Press and hold the "Alarm/Filter Reset" button for about 3 seconds until the light turns off.

    Side-by-Side Model

    • Press and hold the "Ice Type/Filter Reset" button for 3 seconds.

    Four-Door Model

    • Press and hold the "Crushed Ice/Filter Reset" button for 3 seconds.

  4. Verify Reset Ensure the indicator light is off and not flashing. If the light remains on, attempt the reset procedure again.

Troubleshooting Common Issues

Filter Light Won’t Turn Off

If the light doesn't reset after following the above steps, try the following solutions:

  • Ensure Firm Insertion: Double-check that the new filter is installed correctly and seated firmly.
  • Double Reset: Retry the reset process by holding the appropriate button for 3-5 seconds.
  • Power Cycle: Unplug the refrigerator for a few minutes, then plug it back in and attempt the reset again.

Filter Indicator Light Still On

  • Check to see if there is debris or an obstruction within the filter’s seating area.
  • Confirm that the filter is compatible with your Samsung refrigerator model.

When to Seek Professional Help

If the filter light persists after multiple attempts, it may be an issue related to the control panel software or hardware malfunction. Contact Samsung customer service or a certified technician for further assistance.

Maintaining your refrigerator's water filter system ensures clean water and ice, providing safety and enhancing the appliance's performance. Resetting the filter light is a key part of the maintenance process, allowing the reminder system to function effectively for future filter changes. By following the steps outlined above, you can ensure your Samsung refrigerator is in optimal running condition.