Error Codes

Understanding Displayed Error Codes

Fisher & Paykel refrigerators are equipped with a sophisticated diagnostic system designed to display error codes when issues occur. These codes help identify specific problems, making it easier for users or technicians to address and resolve them. The error codes typically appear on the digital display, offering clues about potential malfunctions within the appliance.

Understanding these codes is crucial as they guide the initial steps for troubleshooting and repair. Before attempting any solutions, ensure you refer to the displayed error code accurately, as it will direct you toward the appropriate corrective measures.

Common Error Codes

E1 to E5 Codes: Description and Solutions

• E1 - Temperature Sensor Fault: This code indicates an issue with the temperature sensor. Solution: Check the sensor connections and ensure they are secure. If the problem persists, the sensor may need replacement.

• E2 - Defrost Heater Fault: The defrost heater is not functioning correctly. Solution: Inspect the heater for signs of damage or disconnection. If damaged, replace the heater element.

• E3 - Fan Motor Problem: A problem with the refrigerator's fan motor can cause inefficient cooling. Solution: Inspect the fan motor and blades for blockages or debris. Clean as necessary and replace the motor if it fails to operate.

• E4 - Door Switch Error: The door switch may be malfunctioning, causing incorrect readings. Solution: Test the door switch for continuity using a multimeter. Replace the switch if faulty.

• E5 - Defrost Thermostat Fault: The defrost thermostat might not be operating within its parameters. Solution: Check the thermostat's resistance and replace if it doesn't match the specified range.

E6 to E10 Codes: Description and Solutions

• E6 - Compressor Start Failure: Issues in starting the compressor are indicated by this code. Solution: Inspect the compressor relay and overload protector. Replace any faulty components.

• E7 - Thermistor Error: A thermistor error suggests incorrect temperature readings. Solution: Examine thermistor connections and replace the thermistor if readings are inconsistent.

• E8 - Water Inlet Error: The refrigerator is not receiving water as expected. Solution: Verify that the water inlet valve is open and clean. Check hose connections for leaks or kinks.

• E9 - Ice Maker Fault: An issue has been detected in the ice maker system. Solution: Ensure the ice maker is not obstructed. Reset the ice maker and replace components if necessary.

• E10 - Display Board Malfunction: There may be a fault in the digital display board. Solution: Check display connections and power supply. Replace the board if it fails to function correctly.

Advanced Error Codes

E11 to E15 Codes: Description and Solutions

• E11 - Inverter Board Failure: Issues with the inverter board could affect cooling operations. Solution: Inspect the inverter board for visual damage and ensure electrical connections are intact. A faulty board will need replacement.

• E12 - LED Lighting Error: Indicates a malfunction in the refrigerator's lighting system. Solution: Check LED modules and connections. Replace any defective components or modules.

• E13 - Evaporator Fan Fault: The evaporator fan might not be functioning properly, affecting airflow. Solution: Examine the fan for obstructions and ensure it's spinning freely. Replace the fan motor if defective.

• E14 - Freezer Temperature Sensor Fault: Issues with the freezer's temperature sensor can lead to inconsistent cooling. Solution: Test the sensor's accuracy and replace if necessary.

• E15 - Ice Dispenser Issue: An error with ice dispensing can disrupt performance. Solution: Check for blockages in the ice chute and ensure the dispenser is powered. Replace parts if needed.

E16 to E20 Codes: Description and Solutions

• E16 - Power Loss Memory: Indicates a previous power outage may have compromised settings. Solution: Reset the refrigerator settings as required. Confirm stable power supply to prevent recurrence.

• E17 - Water Filter Fault: The filter may be clogged or improperly installed. Solution: Replace the water filter and ensure it is securely fitted.

• E18 - Ambient Temperature Sensor Error: Malfunctioning external temperature sensor affecting overall performance. Solution: Check sensor wiring and replace the sensor if anomalies in readings are detected.

• E19 - Damper Control Error: The damper controlling air distribution may be faulty. Solution: Inspect the damper for blockages and mechanical failure, and replace if necessary.

• E20 - Refrigerant Leak Detected: A critical error indicating refrigerant levels are below acceptable levels. Solution: Consult a professional for a full inspection and refrigerant recharge, as handling refrigerants requires expertise.

Effectively addressing these error codes can minimize downtime and extend the lifespan of your Fisher & Paykel refrigerator. Be sure to consult a qualified technician for repairs that are beyond basic troubleshooting to ensure both safety and compliance with warranty conditions.