Haier Refrigerator Owner's Manual

Installation

Unpacking and Handling

Unpacking your Haier refrigerator with care is vital to ensure that it remains in pristine condition. Follow these steps to unpack and handle your new appliance correctly:

1. Inspect the packaging for any signs of damage during transit. If damage is visible, contact your retailer before proceeding.
2. When removing the packaging, use a box cutter or scissors to cut the tape and open the box safely.
3. Gently lift the refrigerator out of the box. Have an assistant available to help with lifting to avoid injury or damage to the unit.
4. Remove any protective plastic and foam used inside and outside the refrigerator, making sure all accessories and manuals have been included.

Choosing the Location

Selecting the right location for your Haier refrigerator ensures optimal performance and longevity. Consider the following aspects for an ideal placement:

• Space Requirements: Ensure the selected area provides ample space for proper ventilation and accessibility. Allow at least 2 inches of space on each side and the back of the refrigerator to promote airflow and prevent overheating.

• Avoiding Heat Sources: Place the refrigerator away from heat sources such as ovens, dishwashers, or direct sunlight, which can adversely affect its efficiency. Ideally, maintain a distance of at least 3 feet from these heat sources.

Leveling the Refrigerator

Proper leveling prevents unnecessary noise and ensures efficient operation. Follow these steps to level your refrigerator:

• Using Adjustable Feet: Your refrigerator is equipped with adjustable feet. Turn them clockwise to raise the unit or counterclockwise to lower it. Use a wrench if necessary.

• Verifying Proper Leveling: Place a carpenter’s level on top of the refrigerator and adjust the feet until the unit is level from front to back and side to side. This ensures the doors seal correctly and reduces operational noise.

Water Line Connection

For models with a water dispenser or ice maker, a water line connection is essential. Here's how to set it up:

• Required Tools and Materials: Before beginning, gather the necessary tools and materials, including a water line kit, adjustable wrench, and Teflon tape.

• Step-by-Step Guide:

  1. Locate the nearest cold water supply. Shut off the water supply before proceeding.
  2. Connect the water line to the refrigerator using the appropriate fittings from your water line kit. Ensure a snug fit by applying Teflon tape to the threads.
  3. Use a saddle valve or another approved method to tap into the home's water line, ensuring a stable water flow to the refrigerator.
  4. Slowly turn on the water supply and check for leaks, tightening fittings as needed. Ensure the line allows flexibility to move the refrigerator for future maintenance.

Initial Power-Up

Powering your refrigerator correctly the first time sets the stage for successful long-term operation:

• Power Source Requirements: Connect your Haier refrigerator to a 115V AC, 60Hz outlet. Ensure the outlet is grounded and cannot be turned off by a wall switch.

• First-Time Refrigeration:

  1. Plug your refrigerator into the wall outlet.
  2. Adjust the thermostat to the recommended initial setting as per the manual to allow the interior to cool to the optimal temperature.
  3. Allow the refrigerator to operate for 24 hours before storing food to ensure it is functioning correctly and reaches proper cooling temperatures.

Properly installing and configuring your new Haier refrigerator will ensure it operates efficiently and reliably, providing peace of mind in your kitchen setup.