Liebherr Refrigerator Owner's Manual

Installation

Choosing the Right Location

Selecting the perfect spot for your Liebherr refrigerator is crucial to ensure optimal performance and longevity. Consider these factors:

• Ventilation: Ensure there is adequate space around the refrigerator for proper air circulation. Ideally, leave at least 1-2 inches on the sides and 2 inches at the back.
• Temperature: The location should be away from direct sunlight, heat sources (like ovens or radiators), and areas with high humidity levels.
• Floor Stability: The floor should be even and capable of supporting the weight of the refrigerator when fully stocked.
• Accessibility: The location should allow for easy access to the refrigerator, making it convenient to remove items and clean around the unit.

Unpacking and Transporting the Refrigerator

Upon receiving your Liebherr refrigerator, follow these guidelines for unpacking and transporting:

1. Inspect the Package: Check for visible damage on the packaging. If there is any, inspect the refrigerator for damage before signing the delivery receipt.
2. Unpacking: Carefully remove the packaging materials. Be cautious of staples and nails that may have been used in the packaging process.
3. Transporting: Use a dolly or sturdy trolley for moving the refrigerator. Always keep it upright to avoid damaging the compressor. Make sure to secure the doors with tape to prevent them from swinging during transport.

Electrical Requirements and Connections

Proper electrical connections are vital for the efficient functioning of the refrigerator:

• Power Supply: Ensure a dedicated and properly grounded outlet is used. The standard voltage requirement for Liebherr refrigerators is 110-120V.
• Avoid Extension Cords: Do not use extension cords or outlet adaptors as they can overheat and pose safety risks.
• Circuit Safety: The circuit should be protected by a 15 or 20 amp circuit breaker or time-delay fuse.
• Connection: Carefully plug in the refrigerator cord into the appropriate outlet. Avoid unplugging and re-plugging multiple times within short periods.

Leveling the Refrigerator

Leveling ensures the reliable operation of your refrigerator:

1. Tools Needed: A leveling tool or app, and a wrench.
2. Front to Back: Check the level using a tool placed on top of the refrigerator. Adjust the front legs, if needed, to ensure slight backward tilt for door closure.
3. Side to Side: Adjust the legs to achieve a level orientation width-wise.
4. Final Check: Open and close the door to ensure it seals properly and operates smoothly.

Installing the Water Filter (if applicable)

Many Liebherr models come with an option for water filtration:

• Location: Refer to your model’s manual to locate the water filter compartment, usually found inside the refrigerator.
• Installation: Align the filter with the grooves and twist to lock into place.
• Flushing: After installation, run water through the dispenser for 5 minutes to clear the system of any residual particles.

Door Swing and Reversal Options

Adjusting the door swing depends on your kitchen layout:

1. Tools Needed: Screwdriver set, wrench, and the included door reversal kit (if applicable).
2. Unscrew the Hinges: Remove the screws securing the door to the hinge.
3. Reattach on Opposite Side: Secure the door onto the opposite side using the same screws, following the manual’s instructions meticulously.
4. Test the Fit: Assure the door swings open freely and closes tightly to prevent cooling loss.

Setting up Shelves and Storage Adjustments

To customize storage:

• Adjustable Shelves: Most models feature adjustable shelves. Align the shelves with the desired slots and slide them into place.
• Door Bins: Relocate door bins by sliding them up and out of their current position and slotting them into a preferred location.
• Drawer Configurations: Consider how you'll organize perishables, customizing drawer placement if possible to maximize storage efficiency.

Initial Cooling Setup Procedures

Before loading your food:

• Allow Settling Time: After placing the refrigerator, wait at least 4 hours before plugging it in to allow refrigerant to settle.
• Plug In and Power On: Turn on the appliance using the adjustment dial or digital control panel found inside the refrigerator.
• Temperature Settings: Initially, set the refrigerator to the recommended temperature of 37°F (3°C) and the freezer to 0°F (-18°C).
• Monitor Performance: Allow 24 hours for the unit to reach the set temperatures before placing food inside.