Sanyo Refrigerator Owner's Manual

Installation

Unpacking Your Refrigerator

Before you begin the installation process, it is essential to safely unpack your Sanyo refrigerator. Carefully remove all packaging materials and tape from the refrigerator. Be sure to keep the refrigerator upright to prevent damage. Check for any dents or scratches that might have occurred during transit. If you notice any damage, contact your retailer immediately.

Choosing the Right Location

Selecting an appropriate location for your refrigerator is crucial for optimal performance. Choose a place that is level, away from direct sunlight, and at a safe distance from heat sources like ovens or heaters. Ensure that there is adequate ventilation space around the refrigerator, with at least 2 inches (5 cm) of clearance on each side and the top.

Leveling the Refrigerator

To ensure proper operation and to prevent unwanted noises, make sure your refrigerator is level. Use a level tool to check the appliance from front to back and side to side. Adjust the front leveling legs by turning them clockwise to raise the refrigerator or counterclockwise to lower it until it is perfectly level.

Connecting to Power Supply

After positioning and leveling the refrigerator, connect it to a power supply. Make sure that the power outlet is easily accessible and grounded. Avoid using extension cords as they can compromise the efficiency and safety of the appliance. Check that the voltage and frequency match the specifications on the refrigerator's rating plate.

Setting Up Water Line (if applicable)

If your refrigerator model includes a water dispenser or ice maker, you will need to connect it to a water supply line. Turn off your home's main water supply before connecting the refrigerator. Use the appropriate water line kit and follow the manufacturer's instructions to make a secure connection. Once the water line is connected, turn on the main water supply and inspect for any leaks.

Installing the Shelves and Drawers

The next step is to install the interior components of your refrigerator. Carefully insert shelves and drawers into designated tracks inside the appliance. Ensure they are securely in place to avoid shifting during use. Arrange them according to your storage needs to maximize space and convenience.

Initial Temperature Settings

Set the refrigerator and freezer compartments to the recommended initial temperatures. Typically, the refrigerator should be set to 37°F (3°C) and the freezer to 0°F (-18°C). Allow the appliance to reach the desired temperatures before storing any food. This usually takes about 24 hours.

Final Inspection Checklist

Before fully stocking your refrigerator, go through this final checklist:

• Ensure the appliance is level and securely positioned.
• Confirm that the power supply is connected and in accordance with the specifications.
• Check the water line for leaks if applicable.
• Verify that shelves and drawers are properly installed.
• Ensure the initial temperature settings are accurate.
• Double-check there are no obstructions around the refrigerator.
• Make sure all doors seal properly to maintain cooling efficiency.

Once all steps are complete, your Sanyo refrigerator is ready for use. Enjoy the convenience and efficiency of your newly installed appliance!