Victory Refrigeration Refrigerator Owner's Manual

Installation

Unpacking and Inspecting the Refrigerator

When your Victory Refrigeration refrigerator arrives, it is crucial to carefully unpack and inspect the appliance to ensure that it has not sustained any damage during transit. Follow these steps to properly unpack and inspect:

1. Unpacking:

   • Start by removing the outer packaging. Use a box cutter or scissors to carefully cut open the box, taking care not to scratch the refrigerator's surface.
   • Remove any protective plastic or foam packaging material from the exterior of the refrigerator.

2. Inspecting:

   • Examine the exterior of the refrigerator for any visible dents, scratches, or other damage.
   • Open the doors and verify that all shelves, drawers, and other accessories are present and undamaged.
   • Check for any loose parts or wires that might have become dislodged during shipping.

If any damage is discovered, contact the supplier or manufacturer immediately for assistance.

Choosing the Right Location

Selecting the optimal location for your refrigerator is essential for ensuring efficiency and longevity. Here’s how to choose the right spot:

• Space Requirements:

  • Measure the dimensions of the refrigerator, including width, depth, and height, and compare them to the available space.
  • Ensure there is adequate clearance around the refrigerator. It is recommended to have at least 2 inches of clearance on all sides for proper airflow.

• Ventilation Considerations:

  • Do not place the refrigerator in a confined or non-ventilated space to prevent overheating.
  • Avoid direct sunlight or placement near heat sources like ovens or radiators, as these can hinder the refrigerator’s performance.

Electrical Requirements

Understanding your refrigerator’s electrical requirements is crucial for safe and efficient operation. Here’s what you need to know:

• Power Supply Specifications:

  • Use a grounded electrical outlet rated for the refrigerator’s voltage, typically 120 volts, 60 Hz.
  • Ensure the outlet is properly installed and adheres to national and local electrical codes.

• Grounding Instructions:

  • Your refrigerator must be plugged into a grounded three-prong outlet. Do not remove the ground prong under any circumstances.
  • If a grounded outlet is unavailable, have a qualified electrician install one. Never use extension cords or adapters.

Initial Setup

Once your refrigerator is unpacked and correctly located, it’s time to set it up. Follow these steps for a successful installation:

• Leveling the Refrigerator:

  • Proper leveling is crucial to ensure that doors align correctly and close securely. Use a spirit level to check the appliance’s horizontal and vertical alignments.
  • Adjust the leveling legs by turning them clockwise to raise and counter-clockwise to lower until the refrigerator is leveled adequately.

• Connecting the Power:

  • Once the refrigerator is leveled, plug it into the properly grounded outlet.
  • Wait for the system to stabilize before loading it with food. This typically takes 24 hours.

By carefully following these installation instructions, you can ensure that your Victory Refrigeration refrigerator operates efficiently and reliably for years to come.