Zanussi Refrigerator Owner's Manual

Installation

Selecting the Right Location

When selecting a location for your Zanussi refrigerator, consider the following factors to ensure optimal performance and to maximize convenience:

• Proximity to Outlets: Ensure the location is near a grounded electrical outlet.
• Temperature Control: Avoid placing the refrigerator next to heat sources such as ovens, dishwashers, or direct sunlight, as this can affect its efficiency.
• Space: Allow sufficient space around the refrigerator for proper air circulation. This includes at least two inches of space from the back wall and one inch on the sides.
• Flooring: Choose a flat, sturdy surface that can support the refrigerator's weight, with proper flooring to prevent any imbalance or tilting.

Unpacking Your Refrigerator

Unpacking your Zanussi refrigerator carefully is crucial to avoid any damage:

• Check Packaging: Before opening, inspect the packaging for any signs of damage during transit.
• Remove Packaging Materials: Carefully remove all packaging materials, including protective tape and corner guards.
• Inspect the Unit: Once unpacked, inspect the refrigerator for any dents, scratches, or other damages. If any damage is found, contact the retailer immediately.
• Remove Interior Packaging: Inside, remove any cardboard or plastic coverings and ensure all shelves and components are properly secured.

Leveling and Alignment

Proper leveling is vital for the refrigerator to function efficiently:

• Tools Required: You will need a level tool and a screwdriver.
• Leveling Legs: Adjust the leveling legs at the bottom of the refrigerator by turning them clockwise to raise and counterclockwise to lower.
• Check the Level: Place the level on top of the refrigerator to ensure it is even. Adjust as necessary until the bubble in the level is centered.
• Alignment Check: Make sure the doors are aligned and open and close smoothly. Adjust the leveling legs again if needed.

Connecting to Power Supply

Ensure a safe connection to power for the refrigerator:

• Dedicated Outlet: Use a dedicated grounded electrical outlet. Avoid using extension cords or adapters.
• Voltage Requirement: The refrigerator requires a 220-240V power supply. Check your home's electrical system compatibility.
• Plug In: Once the unit is in place and leveled, plug the power cord into the outlet.
• Initial Power Test: Confirm the lights and fan are operational, indicating successful power connection.

Water Line Connection (If Applicable)

Some refrigerator models include water dispensers and ice makers that require a water connection:

• Shut Off the Water Supply: Before installing, turn off the water supply to prevent leaks.
• Attach the Water Line: Connect the water line to the refrigerator's water inlet valve following the manufacturer's instructions.
• Secure the Connection: Use a wrench to secure the connection but do not overtighten.
• Turn On the Water Supply: Slowly turn on the water valve, checking for leaks. Tighten connections if necessary.

First Time Start-Up Procedures

Preparing the refrigerator for its first use involves some important steps:

• Allow to Settle: After moving the refrigerator, let it settle for at least four hours to allow the refrigerant to stabilize.
• Set Temperature: Set the refrigerator and freezer compartments to the recommended temperatures (usually between 37-40°F for the fridge and 0°F for the freezer).
• Fill Gradually: Gradually fill the refrigerator and freezer to allow temperatures to stabilize and avoid overloading.
• Monitoring: Over the first few days, monitor both temperature and door seals to ensure consistent performance.

Safety Precautions During Installation

Safety measures are critical for a successful installation process:

• Handle with Care: Use proper lifting techniques to avoid injury when moving the refrigerator.
• Electrical Safety: Ensure hands are dry when plugging and unplugging the refrigerator, and avoid water exposure near electrical components.
• Child Safety: Keep children away from the installation area to prevent accidents.
• Fire Hazard: Do not store flammable materials near the refrigerator or ignore electrical cord damage.

By following these installation guidelines, your Zanussi refrigerator will be properly set up and ready to deliver optimal performance.